Cheat Engine

timmizzle · Cheater Reputation: 0 Joined: 05 Jan 2010 Posts: 30

but this is me learning !

hcavolsdsadgadsg · Posted: Sun Feb 21, 2010 1:28 am Post subject:

srsly guy.

connect everything like you were going to use it.
instead of hitting the power button, connect both pins with something metal THUS creating a closed circuit.

just fkin touch them both to something metal at the same time. blade of a screwdriver, whatever.

kls85 · Posted: Mon Feb 22, 2010 12:17 pm Post subject:

Building a computer is very easy if you follow the 3 simple steps.

1. Build computer and turn it on
2. If it does not work, pull hair and scream like a little girl while running around in little circles.
3. Toss machine out the window. Razz

Seriously, take the motherboard outside of your case see if that works.
Also make sure your additional connectors (front panel USB, audio, etc) are not plugged in backwards or unplug them to see if they're causing the problem.

Haswell · Posted: Mon Feb 22, 2010 12:26 pm Post subject:

I'm more inclined to think that he didn't plug in the I/O switch correctly.

potaters · Posted: Mon Feb 22, 2010 3:27 pm Post subject:

lol you should go down to best buy and pick yourself up a nice Mac, PC's seem to be hard for you to understand.

timmizzle · Cheater Reputation: 0 Joined: 05 Jan 2010 Posts: 30

@haswell, thats what i was thinking too.

@xen0r i wanna learn PC!

Karakawe · Posted: Mon Feb 22, 2010 7:11 pm Post subject:

timmizzle · Cheater Reputation: 0 Joined: 05 Jan 2010 Posts: 30

can i just connect PWR, to see if it even turns on?
and can i unplug the pins while my psu is plugged in? will it risk a fry?

hcavolsdsadgadsg · Posted: Wed Feb 24, 2010 12:34 am Post subject:

the psu is the ground when it's plugged in, not the case.

what have you been doing if you haven't had the power button connected, trying to turn it on by sheer willpower?

timmizzle · Cheater Reputation: 0 Joined: 05 Jan 2010 Posts: 30

lol i have to unplug it, redo my f_pannel pins, plug psu back in, turn on
repeat.

takes too long to try every method.
still dont know why its not working for me

Haswell · Posted: Wed Feb 24, 2010 8:03 am Post subject:

1. Unplug everything (and I mean everything. RAM, video card, everything. Leave the CPU though)
2. Take mobo out of case
3. Plug in PSU cables ONLY (cables that only supplies power, nothing else)
4. Plug in I/O switch according to the manual (RTFM, for god sake)
5. Check that PSU is actually connected to your wall socket and possibly the switch behind is switched to "on"
6. Try to turn on your computer.

Note that this is just to test if it would POST. If it still doesn't turn on, disconnect the I/O switch and use a paperclip/staple/anything small enough to jump the two pins. You should know where they are if you know where to plug in the I/O switch.

kls85 · Posted: Wed Feb 24, 2010 9:33 am Post subject:

On the back of the PSU (or somewhere on the side), some models have a additional switch with a voltage of 115/220 (some models have different numbers and the switch is usually red). If your in the US do not set it to higher number otherwise the system may not turn on.

If you don't have that switch, then it's automatic.

Hero · Posted: Wed Feb 24, 2010 12:37 pm Post subject:

Phox · Posted: Wed Feb 24, 2010 1:01 pm Post subject:

Is it just me, or is there no video card on that list?

TraxMate · Posted: Wed Feb 24, 2010 1:48 pm Post subject: