Cheat Engine

Hero · Posted: Sun Feb 14, 2010 8:02 pm Post subject: desktop wont turn on

was out for 10 hours. Came home to find my desktop wont turn on and my buddies laptop charge doesnt work neither. Just tested the psu on my dads desktop and it lights up the mobos power light before I even put in the rest of the plugs. How can I tell if my mobo is shorted?

Domoo · Posted: Sun Feb 14, 2010 8:03 pm Post subject:

Does it make a beep?

Hero · Posted: Sun Feb 14, 2010 8:09 pm Post subject:

mobo wont work at all. No sounds or anything. Video card and PSU are 100% functional.

Domoo · Posted: Sun Feb 14, 2010 8:11 pm Post subject:

Hero · Posted: Sun Feb 14, 2010 8:32 pm Post subject:

Now the mobo is working but the onboard vga wont work at all.

Konata Izumi · Posted: Sun Feb 14, 2010 8:47 pm Post subject:

use your 4850 then...

Hero · Posted: Sun Feb 14, 2010 9:27 pm Post subject:

nothing is working on the mobo. If it does work it says ddr2 ram ungaged and then it doesnt start the search for the HDDs. This is bullshit. The other mobo I hve for my dads build wont even turn on.

Domoo · Posted: Sun Feb 14, 2010 9:51 pm Post subject:

elpacco · Posted: Sun Feb 14, 2010 9:58 pm Post subject:

Domoo · Posted: Sun Feb 14, 2010 10:01 pm Post subject:

Hero · Posted: Sun Feb 14, 2010 10:29 pm Post subject:

Konata Izumi · Posted: Sun Feb 14, 2010 10:38 pm Post subject:

told you you should have put a little more into that build.

kls85 · Posted: Sun Feb 14, 2010 11:14 pm Post subject:

In this thread all I see is a bunch of confusion and chaos.
Hope you get your problem fix as getting a better mobo isn't the only solution.

What if you bought yourself a $300 mobo and got the same thing, you're going out and get yourself a "better mobo"?

-For the SATA drive not passing POST, try a different SATA and Power cable as well as try a different SATA port.

-You may as well try resetting your CMOS and updating the BIOS.

-What happened to your father's PC is it even working after you tried your PSU?

-How's your buddy's charger, is it working now?

-Have your try changing a different power strip, different power cord (for your PC), or even taking your rig into another location in your house to verify whether it's the PC itself or some fault with your electrical socket.

Hero · Posted: Sun Feb 14, 2010 11:19 pm Post subject:

kls85 · Posted: Sun Feb 14, 2010 11:30 pm Post subject:

The HDD you have your OS installed can only be booted from the hardware specs it was originally installed on. Taking the HDD into another mobo and booting up the OS will result in a BSOD.

And according to the web "DDR2(clock speed) ungaged mode" indicates your ram isn't operating at it's specify frequency.
Just use one stick of ram, go into the bios and make sure the ram setting are correct. Then save and exit changes, power off system. plug in your HDD and see if that works.

If yes, power off again and install other remaining ram and power on again and see what happens.