 |
Cheat Engine The Official Site of Cheat Engine
|
| View previous topic :: View next topic |
| Author |
Message |
Imitazion Grandmaster Cheater
Reputation: 0
Joined: 19 Oct 2006 Posts: 558
|
Posted: Fri Nov 28, 2008 6:30 am Post subject: New rig. |
|
|
Hey, I'm currently thinking of a new rig, and I already looked up some stuff, but i would like to know if there are anything better to the same price.
GPU: CLub3D HD 4780 Overclocked Edition, 1.763DKK.
CPU: 3.33GHz Core 2 Duo E8600 6MB Cache Intel Boxed, 1.865DKK
Master HDD: IBM 36.4 GB / 15000 rpm / 8 MB / Ultra320 SCSI / 9 ms (It's for bootup.) 859DKK
Slave HDD: Maxtor 1 TB / 7200 rpm / 32 MB / Serial ATA-300 / 8.5 ms (For games, pictures, movies and crap.) 728DKK
Motherboard: ASRock P45TurboTwins2000, 741DKK
RAM: Kingston ValueRAM 2x2GB 1333MHz, 985DKK
PSU: Xilence 800W 800 Watt PSU / ATX / AC 115/230 V / 50 - 60 kHz / 24x Powercables, 808DKK
Case: AeroCool ExtremEngine 3T, 2 fans, mainboard;ATX/MicroATX 659DKK
More info coming, gotta get off my trian. _________________
|
|
| Back to top |
|
 |
Cheetah I post too much
Reputation: 0
Joined: 11 Nov 2007 Posts: 2758
|
Posted: Fri Nov 28, 2008 7:38 am Post subject: Re: New rig. |
|
|
| Imitazion wrote: | Hey, I'm currently thinking of a new rig, and I already looked up some stuff, but i would like to know if there are anything better to the same price.
GPU: CLub3D HD 4780 Overclocked Edition, 1.763DKK.
CPU: 3.33GHz Core 2 Duo E8600 6MB Cache Intel Boxed, 1.865DKK
Master HDD: IBM 36.4 GB / 15000 rpm / 8 MB / Ultra320 SCSI / 9 ms (It's for bootup.) 859DKK
Slave HDD: Maxtor 1 TB / 7200 rpm / 32 MB / Serial ATA-300 / 8.5 ms (For games, pictures, movies and crap.) 728DKK
Motherboard: ASRock P45TurboTwins2000, 741DKK
RAM: Kingston ValueRAM 2x2GB 1333MHz, 985DKK
PSU: Xilence 800W 800 Watt PSU / ATX / AC 115/230 V / 50 - 60 kHz / 24x Powercables, 808DKK
Case: AeroCool ExtremEngine 3T, 2 fans, mainboard;ATX/MicroATX 659DKK
More info coming, gotta get off my trian. |
Switch the PSU to Corsair 750w(still overkill, but it's cheap and good quality). Switch the CPU to E8500. The usage of a SCSI drive tells me you're probably a heavy multi-tasker, in which case I would suggest considering a quad core instead.
Speaking of SCSI, you'll need a SCSI controller card (you can pick these up on ebay for next to nothing.) You'll also need a cable as well as a terminator(if the cable doesn't have one built in.) If the drive is an 80-pin model, you'll need a 68-80 pin convertor (since I'm assuming you won't be using a backplane.) You'll also have to set the SCSI ID's and make sure there's termination on both ends of the bus. SCSI isn't plug and play like SATA, it can be a headache, which is why I'd suggest going with a Raptor or SSD instead. Though if you aren't an extreme multi-tasker, a normal SATA drive will be perfectly fine.
Newegg also has a deal on 1.5TB Seagate drives for like $120, I'd go that route instead of a 1TB since it's not much more.
Nice sig  |
|
| Back to top |
|
 |
Konata Izumi Grandmaster Cheater Supreme
Reputation: 3
Joined: 14 Feb 2008 Posts: 1527
|
Posted: Fri Nov 28, 2008 11:14 am Post subject: |
|
|
dont waste money on the 1500 rpm drive.
just get the 1tb.
and i would suggest a quad core. _________________
CARCASSSSSSSSSSSSSSS |
|
| Back to top |
|
 |
TheZaw Valve mod
Reputation: 0
Joined: 01 Mar 2008 Posts: 1061 Location: Learning C++
|
Posted: Fri Nov 28, 2008 12:03 pm Post subject: |
|
|
Nice gpu, wish i had it =(. The case seems decent too. _________________
|
|
| Back to top |
|
 |
Imitazion Grandmaster Cheater
Reputation: 0
Joined: 19 Oct 2006 Posts: 558
|
Posted: Fri Nov 28, 2008 2:48 pm Post subject: Re: New rig. |
|
|
| Cheetah wrote: | | Imitazion wrote: | Hey, I'm currently thinking of a new rig, and I already looked up some stuff, but i would like to know if there are anything better to the same price.
GPU: CLub3D HD 4780 Overclocked Edition, 1.763DKK.
CPU: 3.33GHz Core 2 Duo E8600 6MB Cache Intel Boxed, 1.865DKK
Master HDD: IBM 36.4 GB / 15000 rpm / 8 MB / Ultra320 SCSI / 9 ms (It's for bootup.) 859DKK
Slave HDD: Maxtor 1 TB / 7200 rpm / 32 MB / Serial ATA-300 / 8.5 ms (For games, pictures, movies and crap.) 728DKK
Motherboard: ASRock P45TurboTwins2000, 741DKK
RAM: Kingston ValueRAM 2x2GB 1333MHz, 985DKK
PSU: Xilence 800W 800 Watt PSU / ATX / AC 115/230 V / 50 - 60 kHz / 24x Powercables, 808DKK
Case: AeroCool ExtremEngine 3T, 2 fans, mainboard;ATX/MicroATX 659DKK
More info coming, gotta get off my trian. |
Switch the PSU to Corsair 750w(still overkill, but it's cheap and good quality). Switch the CPU to E8500. The usage of a SCSI drive tells me you're probably a heavy multi-tasker, in which case I would suggest considering a quad core instead.
Speaking of SCSI, you'll need a SCSI controller card (you can pick these up on ebay for next to nothing.) You'll also need a cable as well as a terminator(if the cable doesn't have one built in.) If the drive is an 80-pin model, you'll need a 68-80 pin convertor (since I'm assuming you won't be using a backplane.) You'll also have to set the SCSI ID's and make sure there's termination on both ends of the bus. SCSI isn't plug and play like SATA, it can be a headache, which is why I'd suggest going with a Raptor or SSD instead. Though if you aren't an extreme multi-tasker, a normal SATA drive will be perfectly fine.
Newegg also has a deal on 1.5TB Seagate drives for like $120, I'd go that route instead of a 1TB since it's not much more.
Nice sig  |
I don't know what SCSI is, but it sounds complicated.
I need a good gaming computer thats pretty fast, and can play high-spec games like the new Crysis(dont remember name), Farcry2, Fallout3 and Left4dead.
I'm also getting a cooler, hang on a second, I'll get the info on it.
After a bit concideration the 15kRPM is a overkill, so I'll just stay with the 1TB. I know that newegg.com is a very good site, but my money is limited, and i calculated from the delivery from the danish companies, as my parents are paying the most of it, they're not happy with ordering from other countries.
And Quad Core, I'm not sure how good they are for overclocking. Would i be able to get all 4 cores to a 4.0GHz?
To me, Quad Core is an overkill, the only graphic program I will be using is Photoshop CS3, and even this laptop handles it pretty well, I would appreciate a little elaboration.
But any suggestions would be awesome, and i appreciate your time to feedback in this thread.
Edit: Yeah, I love it myself.
He's a fucking pain in the ass, he doesn't know shit.  _________________
|
|
| Back to top |
|
 |
superweapons Grandmaster Cheater Supreme
Reputation: 2
Joined: 04 Jan 2008 Posts: 1355 Location: The Internet. Where else?
|
Posted: Fri Nov 28, 2008 3:35 pm Post subject: |
|
|
SCSI is really expensive per gigabyte, although very fast. That's why SATA and PATA are far more dominant.
I don't believe Newegg ships out of the US (not counting their Canadian and Chinese sites).
Using the Q6600 as an example, you can overclock it to 4GHz, but you'll need to get an especially good chip, a very good motherboard (capable of support over 1600MHz FSB, supporting high voltages well, etc.), top-of-the-line cooling, good RAM-pretty much the "best" system setup possible. 3GHz is the sweet spot for Q6600 OC'ing in my opinion, it's about as high as you can get without ramping up the voltage. I'm pretty sure if you're going to be running the Q6600 at 4GHz, you'll be adding insane amounts of voltage to keep it stable. Even 3.6GHz requires quite a bit of VCore in some setups. I'm not sure how well the Yorkfield chips do in overclocking, however I would think they'd perform better than the Q6600, although there are a lot of factors involved. |
|
| Back to top |
|
 |
Imitazion Grandmaster Cheater
Reputation: 0
Joined: 19 Oct 2006 Posts: 558
|
Posted: Fri Nov 28, 2008 4:03 pm Post subject: |
|
|
| superweapons wrote: | SCSI is really expensive per gigabyte, although very fast. That's why SATA and PATA are far more dominant.
I don't believe Newegg ships out of the US (not counting their Canadian and Chinese sites).
Using the Q6600 as an example, you can overclock it to 4GHz, but you'll need to get an especially good chip, a very good motherboard (capable of support over 1600MHz FSB, supporting high voltages well, etc.), top-of-the-line cooling, good RAM-pretty much the "best" system setup possible. 3GHz is the sweet spot for Q6600 OC'ing in my opinion, it's about as high as you can get without ramping up the voltage. I'm pretty sure if you're going to be running the Q6600 at 4GHz, you'll be adding insane amounts of voltage to keep it stable. Even 3.6GHz requires quite a bit of VCore in some setups. I'm not sure how well the Yorkfield chips do in overclocking, however I would think they'd perform better than the Q6600, although there are a lot of factors involved. |
I talked with a very experienced friend, and he said that it is totally unnessecary(typo?) to overclock a CPU higher than 3GHz.
And i would also like to know; would i need cooling to get a better performance out the rig, or would the rig do just fine? Would it get very hot, or would it have a fairly decent temperature? _________________
|
|
| Back to top |
|
 |
Humper Grandmaster Cheater Supreme
Reputation: 0
Joined: 06 Jan 2007 Posts: 1545
|
Posted: Fri Nov 28, 2008 4:42 pm Post subject: |
|
|
"Master HDD: IBM 36.4 GB / 15000 rpm / 8 MB / Ultra320 SCSI / 9 ms (It's for bootup.) 859DKK "
Thats really really cheap :O?!? |
|
| Back to top |
|
 |
Imitazion Grandmaster Cheater
Reputation: 0
Joined: 19 Oct 2006 Posts: 558
|
Posted: Fri Nov 28, 2008 4:46 pm Post subject: |
|
|
@Humper, yes, in fact it is, it surprised med aswell.
Are you from Denmark? _________________
|
|
| Back to top |
|
 |
Karakawe I post too much
Reputation: 3
Joined: 17 Apr 2007 Posts: 3899
|
Posted: Fri Nov 28, 2008 4:51 pm Post subject: |
|
|
| Imitazion wrote: | | superweapons wrote: | SCSI is really expensive per gigabyte, although very fast. That's why SATA and PATA are far more dominant.
I don't believe Newegg ships out of the US (not counting their Canadian and Chinese sites).
Using the Q6600 as an example, you can overclock it to 4GHz, but you'll need to get an especially good chip, a very good motherboard (capable of support over 1600MHz FSB, supporting high voltages well, etc.), top-of-the-line cooling, good RAM-pretty much the "best" system setup possible. 3GHz is the sweet spot for Q6600 OC'ing in my opinion, it's about as high as you can get without ramping up the voltage. I'm pretty sure if you're going to be running the Q6600 at 4GHz, you'll be adding insane amounts of voltage to keep it stable. Even 3.6GHz requires quite a bit of VCore in some setups. I'm not sure how well the Yorkfield chips do in overclocking, however I would think they'd perform better than the Q6600, although there are a lot of factors involved. |
I talked with a very experienced friend, and he said that it is totally unnessecary(typo?) to overclock a CPU higher than 3GHz.
And i would also like to know; would i need cooling to get a better performance out the rig, or would the rig do just fine? Would it get very hot, or would it have a fairly decent temperature? |
It's not necessary, per se, to overclock ANY CPU, but if you can put it to a significantly higher clock without having to up the voltage (heat), it can have a good impact on performance. I recommend you save a little money by going with the Intel Core 2 Duo E8400 3.0Ghz. You're going to want an aftermarket cpu cooler as well, a cool CPU is a happy CPU. A good one will run you about 45 USD. I recommend a Thermaltake Big Typhoon or Tuniq Tower, since the Ultra-120 is hardly ever in stock on newegg.
You can easily put the E8400 up to 3.6GHz without having to change voltages. If you're going to play the popular resource-intensive games out now, I recommend you stay with two cores, since that's all they utilize (for the most part: look at benchmarks of Crysis). With that HD 4870, you'll do fine in any game out today. |
|
| Back to top |
|
 |
Imitazion Grandmaster Cheater
Reputation: 0
Joined: 19 Oct 2006 Posts: 558
|
Posted: Fri Nov 28, 2008 4:55 pm Post subject: |
|
|
| Karakawe wrote: | | Imitazion wrote: | | superweapons wrote: | SCSI is really expensive per gigabyte, although very fast. That's why SATA and PATA are far more dominant.
I don't believe Newegg ships out of the US (not counting their Canadian and Chinese sites).
Using the Q6600 as an example, you can overclock it to 4GHz, but you'll need to get an especially good chip, a very good motherboard (capable of support over 1600MHz FSB, supporting high voltages well, etc.), top-of-the-line cooling, good RAM-pretty much the "best" system setup possible. 3GHz is the sweet spot for Q6600 OC'ing in my opinion, it's about as high as you can get without ramping up the voltage. I'm pretty sure if you're going to be running the Q6600 at 4GHz, you'll be adding insane amounts of voltage to keep it stable. Even 3.6GHz requires quite a bit of VCore in some setups. I'm not sure how well the Yorkfield chips do in overclocking, however I would think they'd perform better than the Q6600, although there are a lot of factors involved. |
I talked with a very experienced friend, and he said that it is totally unnessecary(typo?) to overclock a CPU higher than 3GHz.
And i would also like to know; would i need cooling to get a better performance out the rig, or would the rig do just fine? Would it get very hot, or would it have a fairly decent temperature? |
It's not necessary, per se, to overclock ANY CPU, but if you can put it to a significantly higher clock without having to up the voltage (heat), it can have a good impact on performance. I recommend you save a little money by going with the Intel Core 2 Duo E8400 3.0Ghz. You're going to want an aftermarket cpu cooler as well, a cool CPU is a happy CPU. A good one will run you about 45 USD. I recommend a Thermaltake Big Typhoon or Tuniq Tower, since the Ultra-120 is hardly ever in stock on newegg.
You can easily put the E8400 up to 3.6GHz without having to change voltages. If you're going to play the popular resource-intensive games out now, I recommend you stay with two cores, since that's all they utilize (for the most part: look at benchmarks of Crysis). With that HD 4870, you'll do fine in any game out today. |
I'm not ordering from Newegg, if you read what i wrote earlier in this thread, and I'm sticking with the 3.33GHz Dual Core I listed in my first post.
But i need to know, would i get enough powercables, and would the setup fit together? I'm thinking sockets and such. _________________
|
|
| Back to top |
|
 |
Karakawe I post too much
Reputation: 3
Joined: 17 Apr 2007 Posts: 3899
|
Posted: Fri Nov 28, 2008 5:47 pm Post subject: |
|
|
I suggest you go with the Corsair 750W suggested earlier, or even a lower 650W. 800 is overkill.
Any (new) Corsair will give you PLENTY of cables for most builds.
I had only mentioned the E8400 because it's the most popular of the higher-end (E8400-600) C2D cores: the E8600 is 110 USD more than the E8400 and all you get out of it is an extra multiplier. (I only use USD because you didn't specify a site earlier.) If you're REALLY into spending the extra $110 on something that probably won't do you that much good over the cheaper alternative, it's your money. >_> |
|
| Back to top |
|
 |
Cheetah I post too much
Reputation: 0
Joined: 11 Nov 2007 Posts: 2758
|
Posted: Fri Nov 28, 2008 11:29 pm Post subject: |
|
|
| Imitazion wrote: | | Karakawe wrote: | | Imitazion wrote: | | superweapons wrote: | SCSI is really expensive per gigabyte, although very fast. That's why SATA and PATA are far more dominant.
I don't believe Newegg ships out of the US (not counting their Canadian and Chinese sites).
Using the Q6600 as an example, you can overclock it to 4GHz, but you'll need to get an especially good chip, a very good motherboard (capable of support over 1600MHz FSB, supporting high voltages well, etc.), top-of-the-line cooling, good RAM-pretty much the "best" system setup possible. 3GHz is the sweet spot for Q6600 OC'ing in my opinion, it's about as high as you can get without ramping up the voltage. I'm pretty sure if you're going to be running the Q6600 at 4GHz, you'll be adding insane amounts of voltage to keep it stable. Even 3.6GHz requires quite a bit of VCore in some setups. I'm not sure how well the Yorkfield chips do in overclocking, however I would think they'd perform better than the Q6600, although there are a lot of factors involved. |
I talked with a very experienced friend, and he said that it is totally unnessecary(typo?) to overclock a CPU higher than 3GHz.
And i would also like to know; would i need cooling to get a better performance out the rig, or would the rig do just fine? Would it get very hot, or would it have a fairly decent temperature? |
It's not necessary, per se, to overclock ANY CPU, but if you can put it to a significantly higher clock without having to up the voltage (heat), it can have a good impact on performance. I recommend you save a little money by going with the Intel Core 2 Duo E8400 3.0Ghz. You're going to want an aftermarket cpu cooler as well, a cool CPU is a happy CPU. A good one will run you about 45 USD. I recommend a Thermaltake Big Typhoon or Tuniq Tower, since the Ultra-120 is hardly ever in stock on newegg.
You can easily put the E8400 up to 3.6GHz without having to change voltages. If you're going to play the popular resource-intensive games out now, I recommend you stay with two cores, since that's all they utilize (for the most part: look at benchmarks of Crysis). With that HD 4870, you'll do fine in any game out today. |
I'm not ordering from Newegg, if you read what i wrote earlier in this thread, and I'm sticking with the 3.33GHz Dual Core I listed in my first post.
But i need to know, would i get enough powercables, and would the setup fit together? I'm thinking sockets and such. |
Getting an E8600 over an E8500 is throwing $100 out the window for nothing. Just overclock an E8500. |
|
| Back to top |
|
 |
Imitazion Grandmaster Cheater
Reputation: 0
Joined: 19 Oct 2006 Posts: 558
|
Posted: Sat Nov 29, 2008 9:20 am Post subject: |
|
|
Lulz, i only get 170 extra MHz if i buy a E8600, thank you for telling me that.
I saved 562DKK. _________________
|
|
| Back to top |
|
 |
Konata Izumi Grandmaster Cheater Supreme
Reputation: 3
Joined: 14 Feb 2008 Posts: 1527
|
Posted: Sat Nov 29, 2008 3:03 pm Post subject: |
|
|
and 1tb is overkill. get a 640 gig. _________________
CARCASSSSSSSSSSSSSSS |
|
| Back to top |
|
 |
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You cannot download files in this forum
|
|