Cheat Engine

Polish_Elite_Board · Newbie cheater Reputation: 0 Joined: 03 Aug 2010 Posts: 10

1. Where is Freeze Address option in CE 6.1, I can't freeze values cause i dont see that option, and Freeze all addresses on the list ? or i am blind?

2. How i can Remove button or others components from TCEForm in Trainer Maker ?

3. If I have about 80 Addresses and Values to Freeze by pressing one shortcut or button, how I can do that in CE 6.1 Trainer Maker, beacuse in 5.6.1 version i can do that with no problems ?

4. CE 6.1 Trainer Maker is missing option: Set Value and Freeze ?? (this option in ce 5.6.1 TM is very important, please add it to 6.1)

5. Cheat Engine 6.1 won't open Trainers created with Cheat Engine 5.6.1

Dark Byte · Posted: Sun Jul 10, 2011 10:06 am Post subject:

1: ctrl+a followed by space. (It's of course not that hard to add that menu option back with a lua script)

2: select it and press the delete key

3: Give all 80 the same hotkey, or register a genericHotkey and point it to a code that does that automated
or add a group header and add all 80 entries under it. Then configure the groupheader to active/deactivate it's children, and just set a hotkey for the group header

4: set the property hasEditbox of a TCheat to true. The script generator will adapt and generate a script that after freezing sets the value of the editfield
Alternatively, if the editbox looks like crap, add your own editbox and after generating the script adjust it to make use of your own editbox

alternate method 2 (not recommended):
2 entries with the same hotkey (or 1 header with 2 entries under it):
1 freezes the address
2 sets a value

5: correct. And it will never be able to as it's not compatible at all

Polish_Elite_Board · Newbie cheater Reputation: 0 Joined: 03 Aug 2010 Posts: 10

Please watch this video !

h ttp://youtu.be/O9wJZwCvrRo?hd=1
^ remove space between h*ttp to watch

Dark Byte · Posted: Sun Jul 10, 2011 12:21 pm Post subject:

only difference between 5.6.1 is and 6.1 is that 5.6.1 fakes the current value it's showing when it's frozen and gives you the wrong impression that the value really does not change. 6.1 does not

as you can see at 0:15:
ce 5.6.1 had 12f498 frozen but as seen in 6.1 it doesn't make a difference, it's still changing(while 5.6.1 still has it frozen)

As to WHY freezing has no effect there is because freezing just means write the same value constantly to the address. But if the address changes too quickly you won't notice it. That is especially true for stack addresses (region 12xxxx)

If you want to prevent an address from being changed then hook the code that writes it