Cheat Engine

DURAN · Posted: Mon Sep 01, 2008 3:50 am Post subject: I want to know what socket i have

can someone help me

Blank · Posted: Mon Sep 01, 2008 3:50 am Post subject:

on your current motherboard?

Gee. It'd help to know your motherboard and/or CPU....

DURAN · Posted: Mon Sep 01, 2008 3:58 am Post subject:

Blank · Posted: Mon Sep 01, 2008 3:59 am Post subject:

478 Socket.

DURAN · Posted: Mon Sep 01, 2008 4:02 am Post subject:

Blank · Posted: Mon Sep 01, 2008 4:04 am Post subject:

pkyourface · Posted: Mon Sep 01, 2008 4:36 am Post subject:

Im almost sure that Pentiums use LGA 775.

Blank · Posted: Mon Sep 01, 2008 4:37 am Post subject:

pkyourface · Posted: Mon Sep 01, 2008 4:39 am Post subject:

I know not all of them but if his computer is fairly new then it should be a LGA 775.

EDIT: If you could find out the code name then it will be a lot easier to give a definitive answer.

Leena · Posted: Mon Sep 01, 2008 4:41 am Post subject:

CPU

• Supports Intel® Pentium 4 / Prescott (Socket 478) processor.
• FSB@800/533MHz
• Supports Intel P4 Prescott CPU up to 3.4GHz above, and intel P4 Prescott Celeron CPU

Chipset

• VIA® P4M800 Chipset
- 64bit P4 processors FSB 800MHz
- 64bit DDR SDRAM memory I/F (333/400MHz)
- 32bit AGP I/F (66MHz) for 8x/4x mode
- 8bit V-Link I/F (66MHz) with peak bandwidth of 266MB/s

• VIA® VT8237 Chipset (487 BGA)
- Integrated Hardware Sound Blaster/Direct Sound AC97 audio
- Ultra DMA 66/100/133 master mode PCI EIDE controller
- ACPI & PC2001 compliant enhanced power management
- Supports USB2.0 up to 8 ports

Main Memory

•
Supports Four memory banks using two 184-pin unbuffered DDR333/400 DDR DIMM.
• Supports up to 2GB memory size.
• Supports 2.5v DDR SDRAM.
Due to the High Performance Memory design, motherboards or system configurations may or may not operate smoothly at the JEDEC (Joint Electron Device Engineering Council) standard settings (BIOS Default on the motherboard) such as DDR voltage, memory speeds and memory timing. Please confirm and adjust your memory setting in the BIOS accordingly for better system stability.
Example: Kingston HyperX DDR500 PC4000 operates at 2.65V, 3-4-4-8, CL=3.
For more information about specification of high performance memory modules, please check with your Memory Manufactures for more details.

Slots

• One AGP (Accelerated Graphics Port) 8X slot.
• Three PCI 2.2 32-bit PCI bus slots (support 3.3V/5V PCI bus interface).

BIOS

• The mainboard BIOS provides "Plug & Play" BIOS which detects the peripheral devices and expansion cards of the board automatically.
• The mainboard provides a Desktop Management Interface (DMI) function which records your mainboard specifications.

On-Board IDE

• An IDE Controller on the VT8237 chipset provides IDE HDD/ CD-ROM with PIO, Bus Master and Ultra DMA133/100/66 operation modes.
• Can connect up to four IDE devices.
• Serial ATA 150 controller integrated in VT8237R
• Up to 150MB/s transfer speed
• Can connect up to 2 Serial ATA drives

Video
S3 Graphics Unichrome Pro Integrated Graphics core

Audio

AC'97 link controller integrated in VIA® VT8237
Realtek ALC655 6-channel S/W audio codec.
- Compliance with AC97 v2.2 Spec.
- Meet PC2001 audio performance requirement.

LAN

Realtek 8201CL
- With external 10/100 Base-T LAN transformer.
- Integrated Fast Ethernet MAC and PHY in one chip
- Supports 10Mb/s and 100Mb/s auto-negotation operation.
- Compliance with PCI v.2.2 and PC99 standard.
- Supports ACPI power management.

On-Board Peripherals

- 1 floppy port supports 1 FDD with 360K, 720K, 1.2M, 1.44M and 2.88Mbytes
- 1 serial ports (COM A)
- 1 parallel port supports SPP/EPP/ECP mode.
- 8 USB ports (Rear x 4/ Front x 4).
- 1 audio (Line-In/Line-Out/Mic) port
- 1 RJ-45 LAN jack
- 1 COM B pin header
- 1 VGA port.
- 2 SATA 150

Dimension
9.65 in. (L) x 7.48 in.(W) MicroATX Form Factor

Mounting
6 mounting holes

Blank · Posted: Mon Sep 01, 2008 4:48 am Post subject:

First hit on google, eh Leena?

Leena · Posted: Mon Sep 01, 2008 5:21 am Post subject:

Yep, just googled the motherboard model.

Very Happy

Blank · Posted: Mon Sep 01, 2008 5:22 am Post subject:

Leena · Posted: Mon Sep 01, 2008 5:25 am Post subject:

DURAN · Posted: Mon Sep 01, 2008 5:49 am Post subject:

LGA 775 or socket 478