Cheat Engine

Heartless · Posted: Tue Apr 22, 2008 3:30 pm Post subject: Installing RAM, need HELP!

My firend show me once how to do it, now I forgot. I bought two 512MB RAM, I publged both of them in to my computer but it only says 512MB of RAM when I checked my computer. Anyone know what to do. It would also help if you post a set of instructions.

Localhost · Posted: Tue Apr 22, 2008 3:38 pm Post subject:

Take all your ram out...

If you have 4 ram slots, put 1 in the first one, and one in the second one

If you have 2 ram slots, put 1 in the first one, and one in the second one.

Push down as far as you can, then fasten it with the fasteners. You should here a click. Repeat.

Heartless · Posted: Tue Apr 22, 2008 3:40 pm Post subject:

I did all that, but it still says I have 512MB RAM. It should say I have 1GB of RAM.

Localhost · Posted: Tue Apr 22, 2008 3:53 pm Post subject:

Post a picture of your mobo, and make sure you didnt touch the guild of the RAM... Its not safe.

Cheetah · Posted: Tue Apr 22, 2008 3:54 pm Post subject:

Blow out the RAM slots really well, and check that there's nothing on the pins of the RAM.

If all else fails check the limit the board supports, though I doubt it's limited to 512.

Heartless · Posted: Tue Apr 22, 2008 4:05 pm Post subject:

http://www.motherboard.cz/mb/ecs/P4S5A.htm

Here is it, thisis a very old computer. Before it was using the SDRAM slots, but the ream I bought is DDR. I am sure I put them in the right slots, because the little tabs atthe ends click down.

Zarr · Posted: Tue Apr 22, 2008 4:16 pm Post subject:

Localhost · Posted: Tue Apr 22, 2008 4:27 pm Post subject:

Okay put one in the left blue one. Then put one in the left black one!

It has to be like this!!!

|R| | | |R| | |
|A| | | |A| | |
|M| | | |M| | |
|1| | | |2| | |

It should look like that Ram, Empty, Ram, Empty

Heartless · Posted: Tue Apr 22, 2008 4:46 pm Post subject:

Madman · Posted: Tue Apr 22, 2008 4:55 pm Post subject:

Mine is in dual-channel (next to eachother) but it shouldn't matter, it should still recognize it.

Maybe one of the sticks are a dud.

SF · Posted: Tue Apr 22, 2008 4:57 pm Post subject:

Localhost · Posted: Tue Apr 22, 2008 5:03 pm Post subject:

Just trust me... Put one in the first and third slot.

Report back Smile

hcavolsdsadgadsg · Posted: Tue Apr 22, 2008 5:30 pm Post subject:

Just check one of the new sticks to start off, then check the other.

iTz SWAT · Posted: Tue Apr 22, 2008 10:03 pm Post subject:

I'm guessing your mobo only supports 512 ram.
My old mobo had 512 installed, i bought anuda 512 and it only sed 512.
Sorry mate, i think its time for an upgrade.

Labyrnth · Moderator Reputation: 10 Joined: 28 Nov 2006 Posts: 6301

You have already been told to trouble shoot by using one stick at a time.
Thats what you should do to see if one is a dead stick.
Also if you dont know what the hell you are doing you should not be in there in the first place.