Cheat Engine

hcavolsdsadgadsg · Posted: Sun Oct 04, 2009 11:13 pm Post subject:

i'm banging my head against the desk.

will you just read your own thread, please. your entire system isn't even going to come close to 400w under load let alone your gpu.

elpacco · Posted: Sun Oct 04, 2009 11:22 pm Post subject:

hcavolsdsadgadsg · Posted: Sun Oct 04, 2009 11:45 pm Post subject:

I'm looking at molex connectors on the picture of it...

You might have to get inventive with the converters, but it should work. Just be weary of what you're doing with the converters, ie how much shit you're putting on the 12v rail, etc.

elpacco · Posted: Mon Oct 05, 2009 5:32 pm Post subject:

Okay, I drew a diagram of what I have (a crude one, but nonetheless a diagram). The red cable is what I bought, is that what you guys were talking about (the dual molex to 6-pin?). And will that work without burning my GPU?

Edit: sorry, forgot to attach picture.

superweapons · Posted: Mon Oct 05, 2009 6:08 pm Post subject:

The red cable's dual 4-pin molex connectors should be connected directly to the PSU's 4-pin molex power connectors, and not through the fan's molex connectors. In other words, the red cable should directly bridge the PSU to the GPU.

elpacco · Posted: Mon Oct 05, 2009 6:10 pm Post subject:

hcavolsdsadgadsg · Posted: Mon Oct 05, 2009 6:12 pm Post subject:

what in the hell is going on with your diagram.

corsair's website says you should have 6x of those 4pin connections to begin with.

how are you honestly having so much trouble.

elpacco · Posted: Mon Oct 05, 2009 6:14 pm Post subject:

superweapons · Posted: Mon Oct 05, 2009 6:16 pm Post subject:

Use the Pwr_fan/Sys_fan connectors on your motherboard instead of wasting those 4-pin molex connectors. Hopefully, your fans are decent enough to include them.

hcavolsdsadgadsg · Posted: Mon Oct 05, 2009 6:16 pm Post subject:

so if 4 are running fans and whatnot, use the remaining 2 for the PCI-E connection..

elpacco · Posted: Mon Oct 05, 2009 6:18 pm Post subject:

superweapons · Posted: Mon Oct 05, 2009 6:25 pm Post subject:

Very tiny, white 3/4-pin connectors on your motherboard. From Newegg's pics, there's Sys_fan2 (3-pin) at the bottom (by the LED power), Sys_fan1 (4-pin) above the 90 degree SATA inputs, and Pwr_fan1 (3-pin) besides your IDE connector and 20/20+4 pin motherboard power.

You can also refer to the manual for the exact location. It's clearly labeled on your motherboard, so it shouldn't be too much trouble finding them.

elpacco · Posted: Mon Oct 05, 2009 6:27 pm Post subject:

iTz SWAT · Posted: Mon Oct 05, 2009 8:04 pm Post subject:

THIS IS WHAT YOU NEED.

Plug 2 Molex cables in to the 2 white molex adapters, then plug the black 6 pin into the GPU.

elpacco · Posted: Mon Oct 05, 2009 10:06 pm Post subject:

This is the closest thing I can find to what I have. The only difference between what I have and that, is that the there is a dual molex instead of the other white part in that picture.

I hooked that up to stuff, and I used some of the floppy cables for the Sys_fan etc., and I plugged in the video card and all that, and then it didn't turn on. So I took it all back out, and now it works again.