Cheat Engine

Madman · Posted: Thu Mar 06, 2008 7:10 pm Post subject: Hardware Autoclicker

Ok, so I'm going to be making a hardware autoclicker, following Skyone's schematics:

I have everything except for the capacitor, I forgot to get that when I was at Radioshack. Mad

I am wondering how do you set the timer to run at a certain PPS (pulse per second) ?

Me and Cheetah were thinking it was with the resistors, but I'd like to be sure.

hcavolsdsadgadsg · Posted: Thu Mar 06, 2008 7:12 pm Post subject:

Sounds like a fun project, but why?

Madman · Posted: Thu Mar 06, 2008 7:16 pm Post subject:

The experience, I've never actually made something. Surprised

ControlAltDelete · Posted: Thu Mar 06, 2008 9:17 pm Post subject:

I've made a working headphone headset,Sadly got wrecked when water spilt on it.

Madman · Posted: Thu Mar 06, 2008 9:25 pm Post subject:

So does anybody have any information pertaining to the topic at hand?

Madman · Posted: Thu Mar 06, 2008 9:55 pm Post subject:

Madman · Posted: Thu Mar 06, 2008 10:02 pm Post subject:

Supposedly it would be 15. (These are Skyone's schematics, here's a link to his thread: http://forum.cheatengine.org/viewtopic.php?t=110218 )

Madman · Posted: Thu Mar 06, 2008 11:12 pm Post subject:

Alright, so get something right under or around 4.7 uF?

Pancake · Posted: Thu Mar 06, 2008 11:16 pm Post subject:

hehe. post this on maple story section might be useful to maplers.

Mazeura · Posted: Fri Mar 07, 2008 2:59 am Post subject:

Hang on you said that your getting about 15 PPS on the 4.7uF, right? And you want it to be double the PPS (i.e. 30 PPS), wouldn't it make more sense to half the farad capacity of the capacitor so that it takes less time for it to build up the required charge and release it?

It's been a while since I've messed with circuitry, so I could be wrong, but the higher farad rating on a capacitor means that it takes longer for that capacitor to build up the charge.

I would try to not change the resistors because that would change the voltages and amperage of the current that you are pushing through the wires and that could have undesirable results.

Then again, it's been a while since I've done that kind of stuff, so I could be wrong.

Madman · Posted: Fri Mar 07, 2008 11:24 am Post subject:

I have a 10 uF cap now, I'm going to test it out.

Cheetah · Posted: Fri Mar 07, 2008 12:24 pm Post subject:

Madman · Posted: Fri Mar 07, 2008 12:28 pm Post subject:

I killed the mouse taking off the crap on the left click I think Confused

ukiya006 · How do I cheat? Reputation: 0 Joined: 25 Aug 2006 Posts: 3

did u get it working? i want to buy a hardware clicker Sad

~-=Amil`Ghoul=-~ · How do I cheat? Reputation: 0 Joined: 18 Feb 2008 Posts: 0

dats amazing man!well good luck with that..