Cheat Engine Forum Index Cheat Engine
The Official Site of Cheat Engine
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 


I challenge anyone who can decrypt my hack

 
Post new topic   Reply to topic    Cheat Engine Forum Index -> General Gamehacking
View previous topic :: View next topic  
Author Message
dedlyblady
How do I cheat?
Reputation: 0

Joined: 14 Sep 2017
Posts: 3

PostPosted: Thu Sep 14, 2017 12:23 am    Post subject: I challenge anyone who can decrypt my hack Reply with quote

Hello. I created a small hack for the online game and did a pretty good job and I wanted someone with enough experience to try to decrypt and show the code inside the hack so I could do a stronger protection for it .. I'll leave a link to check the hack for the experience .. Thanks Rolling Eyes
Back to top
View user's profile Send private message
atom0s
Moderator
Reputation: 137

Joined: 25 Jan 2006
Posts: 7257
Location: 127.0.0.1

PostPosted: Thu Sep 14, 2017 2:02 am    Post subject: Reply with quote

Feel free to link to the hack and people here will give it a go.
_________________
- Retired.
Back to top
View user's profile Send private message Visit poster's website
++METHOS
I post too much
Reputation: 75

Joined: 29 Oct 2010
Posts: 3666

PostPosted: Thu Sep 14, 2017 2:06 am    Post subject: Reply with quote

Unless you can prove that the files are actually yours, then this thread is pointless.
Back to top
View user's profile Send private message
Dark Byte
Site Admin
Reputation: 341

Joined: 09 May 2003
Posts: 19983
Location: The netherlands

PostPosted: Thu Sep 14, 2017 2:18 am    Post subject: Reply with quote

++METHOS wrote:
Unless you can prove that the files are actually yours, then this thread is pointless.

you can of course give a few snippets with obfuscated addresses.
it it's his, he will know, if it's not his, it will just piss him off

_________________
Do not ask me about online cheats. I don't know any and wont help finding them.
Back to top
View user's profile Send private message MSN Messenger
dedlyblady
How do I cheat?
Reputation: 0

Joined: 14 Sep 2017
Posts: 3

PostPosted: Thu Sep 14, 2017 2:23 pm    Post subject: Reply with quote

++METHOS wrote:
Unless you can prove that the files are actually yours, then this thread is pointless.


It certainly belongs to me and all files and how did you prove this? This site does not allow the placement of links to download and I do not know how to put you my hack to scan Rolling Eyes
Back to top
View user's profile Send private message
atom0s
Moderator
Reputation: 137

Joined: 25 Jan 2006
Posts: 7257
Location: 127.0.0.1

PostPosted: Thu Sep 14, 2017 10:34 pm    Post subject: Reply with quote

I sent you a pm so you should be able to pm me back now. Feel free to link me via pm and I can update your post here with the link if you want me to share it.
_________________
- Retired.
Back to top
View user's profile Send private message Visit poster's website
++METHOS
I post too much
Reputation: 75

Joined: 29 Oct 2010
Posts: 3666

PostPosted: Fri Sep 15, 2017 2:35 am    Post subject: Reply with quote

Dark Byte wrote:
++METHOS wrote:
Unless you can prove that the files are actually yours, then this thread is pointless.

you can of course give a few snippets with obfuscated addresses.
it it's his, he will know, if it's not his, it will just piss him off
-Good point. Very Happy
Back to top
View user's profile Send private message
atom0s
Moderator
Reputation: 137

Joined: 25 Jan 2006
Posts: 7257
Location: 127.0.0.1

PostPosted: Sat Sep 16, 2017 3:56 am    Post subject: This post has 1 review(s) Reply with quote

He pm'd me back. The files are just AutoIt scripts, nothing is protected or custom. It is default AutoIt. Both exe's are easily decompilable. That said I am not posting the link to it because this seems more of an attempt to get someone else's code as the files are not protected at all.

Script 'chunk' for proof:
Code:
Func focus()
   $gui_read4 = GUICtrlRead($label6)
   $ini_read1 = IniRead(@ScriptDir & "\Speed.ini", $gui_read4, "window", 0)
   $ini_read2 = IniRead(@ScriptDir & "\Speed.ini", $gui_read4, "list", 0)
   WinActivate("[Conquer2.0] " & $gui_read4)
EndFunc

_________________
- Retired.
Back to top
View user's profile Send private message Visit poster's website
dedlyblady
How do I cheat?
Reputation: 0

Joined: 14 Sep 2017
Posts: 3

PostPosted: Sat Sep 16, 2017 7:32 am    Post subject: Reply with quote

atom0s wrote:
He pm'd me back. The files are just AutoIt scripts, nothing is protected or custom. It is default AutoIt. Both exe's are easily decompilable. That said I am not posting the link to it because this seems more of an attempt to get someone else's code as the files are not protected at all.

Script 'chunk' for proof:
Code:
Func focus()
   $gui_read4 = GUICtrlRead($label6)
   $ini_read1 = IniRead(@ScriptDir & "\Speed.ini", $gui_read4, "window", 0)
   $ini_read2 = IniRead(@ScriptDir & "\Speed.ini", $gui_read4, "list", 0)
   WinActivate("[Conquer2.0] " & $gui_read4)
EndFunc



This is a full source and you say that there is no protection and I do not know how this .. So how do I do a serious protection for him ..

Code:
#include <GUIConstants.au3>
#include <NomadMemory.au3>
#Include <GuiListView.au3>

#region var
$SpeedAddress = IniRead(@ScriptDir & "\Speed.ini","Address","Speed","0")
$ZoomAddress = IniRead(@ScriptDir & "\Speed.ini","Address","Zoom","0")
$NameAddress = IniRead(@ScriptDir & "\Speed.ini","Address","Name","0")
$XPAddress = IniRead(@ScriptDir & "\Speed.ini","Address","XP","0")
$LvLAddress = IniRead(@ScriptDir & "\Speed.ini","Address","LvL","0")
$VPAddress = IniRead(@ScriptDir & "\Speed.ini","Address","VP","0")
$XCoordAddress = IniRead(@ScriptDir & "\Speed.ini","Address","X","0")
$YCoordAddress = IniRead(@ScriptDir & "\Speed.ini","Address","Y","0")

   Dim $List_Item[15]
   $List_Item[0] = 0
   $List_Item[1] = 0
   $List_Item[2] = 0
   $List_Item[3] = 0
   $List_Item[4] = 0
   $List_Item[5] = 0
   $List_Item[6] = 0
   $List_Item[7] = 0
   $List_Item[8] = 0
   $List_Item[9] = 0
   $List_Item[10] = 0
   $List_Item[11] = 0
   $List_Item[12] = 0
   $List_Item[13] = 0
   $List_Item[14] = 0
#endregion
$Form1_1 = GUICreate("Speed", 427, 142, 250, 169)
$List1 = GUICtrlCreateListView("Name                 |Speed", 0, 0, 161, 107)
$Button1 = GUICtrlCreateButton("Refresh", 0, 110, 65, 20)
$Group1 = GUICtrlCreateGroup("Options", 320, 0, 95, 125)
$Checkbox1 = GUICtrlCreateCheckbox("Speed", 322, 20, 50, 17)
$Button2 = GUICtrlCreateButton("Set", 338, 102, 45, 20)
$Label11 = GUICtrlCreateLabel("Zoom:", 322, 50, 34, 17)
$Input1 = GUICtrlCreateInput("256", 360, 47, 50, 21, BitOR($GUI_SS_DEFAULT_INPUT,$ES_NUMBER))
GUICtrlCreateUpdown ($Input1)
GUICtrlSetLimit ($Input1, 600 ,150 )
GUICtrlCreateGroup("", -99, -99, 1, 1)
$Group2 = GUICtrlCreateGroup("About", 163, 0, 145, 125)
$Label1 = GUICtrlCreateLabel("Name:", 165, 20, 35, 17)
$Label2 = GUICtrlCreateLabel("Level:", 165, 40, 33, 17)
$Label3 = GUICtrlCreateLabel("Percent:", 165, 60, 44, 17)
$Label4 = GUICtrlCreateLabel("Vp:", 165, 80, 20, 17)
$Label5 = GUICtrlCreateLabel("Coords:", 165, 100, 40, 17)
$Label6 = GUICtrlCreateLabel("", 198, 20, 96, 17)
$Label7 = GUICtrlCreateLabel("", 198, 40, 96, 17)
$Label8 = GUICtrlCreateLabel("", 208, 60, 96, 17)
$Label9 = GUICtrlCreateLabel("", 188, 80, 96, 17)
$Label10 = GUICtrlCreateLabel("", 205, 100, 100, 17)
GUICtrlCreateGroup("", -99, -99, 1, 1)
GUISetState(@SW_SHOW)
While 1
   HotKeySet("^f", "Focus")
   LoadOption()
   LoadAbout()
   Update()
   $nMsg = GUIGetMsg()
   Switch $nMsg
      Case $GUI_EVENT_CLOSE
         Exit
      Case $Button1
         Refresh()
      Case $Button2
         Save()
   EndSwitch
WEnd

Func Refresh()
   GUICtrlDelete($List1)
   $List1 = GUICtrlCreateListView("Name                 |Speed", 0, 0, 161, 107)
   $num1 = 0
   $Process1 = WinList ( "[Conquer2.0]" , "")

   Do   
      If $Process1[0][0] <> 0 Then
         $num1 = $num1 +1
         $Process2 = WinGetProcess ( $Process1[$num1][1])
         
         $Mem_Open1 = _MemoryOpen($Process2)
         $Mem_Read1 = _MemoryRead($NameAddress, $Mem_Open1, 'char[16]') ;name
         _MemoryClose($Mem_Open1)
         
         $List_Item[$num1] = GUICtrlCreateListViewItem ( $Mem_Read1, $List1)
         
         IniWrite(@ScriptDir & "\Speed.ini", $Mem_Read1, "window", $Process2)
         IniWrite(@ScriptDir & "\Speed.ini", $Mem_Read1, "list", $Process2)
         WinSetTitle ( $Process1[$num1][1], "", "[Conquer2.0] " & $Mem_Read1 )
      EndIf
      
   Until $num1 = $Process1[0][0]
      
   EndFunc
   
Func Save()
   $GUI_Read3 = GUICtrlRead($Input1) ;value of zoom input
   $GUI_Read4 = GUICtrlRead($Label6) ;label name
   $GUI_Read5 = GUICtrlRead($Checkbox1)
   $INI_Read1 = IniRead(@ScriptDir & "\Speed.ini", $GUI_Read4, "window", 0)
   If $GUI_Read4 = "" Then
   Else
      If $GUI_Read3 > 149 And $GUI_Read3 < 601 Then
         
         #region mem write
            $Mem_Open1 = _MemoryOpen($INI_Read1)
            _MemoryWrite($ZoomAddress,$Mem_Open1,$GUI_Read3) ;zoom
            IniWrite(@ScriptDir & "\Speed.ini", $GUI_Read4, "Zoom", $GUI_Read3)
            
            If $GUI_Read5 = $GUI_CHECKED Then
               _MemoryWrite($SpeedAddress,$Mem_Open1,128) ;cyclone on
               IniWrite(@ScriptDir & "\Speed.ini", $GUI_Read4, "Cyclone", "128")
            EndIf
            
            If $GUI_Read5 = $GUI_UNCHECKED Then
               _MemoryWrite($SpeedAddress,$Mem_Open1,0) ;cyclone off
               IniWrite(@ScriptDir & "\Speed.ini", $GUI_Read4, "Cyclone", "0")
            EndIf
            
            _MemoryClose($Mem_Open1)
         #endregion
         
      Else
         MsgBox(48,"Error","Zoom must be between 150-600")
      EndIf
   EndIf

EndFunc


Func LoadAbout()
   $GUI_Read1 = GUICtrlRead($List1)
   $GUI_Read2 = _GUICtrlListView_GetItemText($List1, $GUI_Read1 - 25) ;current sel
   GUICtrlSetData($Label6, $GUI_Read2)
   $INI_Read1 = IniRead(@ScriptDir & "\Speed.ini", $GUI_Read2, "window", 0)
   If $GUI_Read2 = "" Then
      GUICtrlSetData($Label7, "0") ;level
      GUICtrlSetData($Label8, "0") ;percent
      GUICtrlSetData($Label9, "0") ;vp
      GUICtrlSetData($Label10, "0") ;x,y
   Else
      #region mem read
      $Mem_Open1 = _MemoryOpen($ini_Read1)
      $Mem_Read2 = _MemoryRead($LvLAddress, $Mem_Open1) ;level
      $Mem_Read3 = _MemoryRead($XPAddress, $Mem_Open1) ;xp
      $Mem_Read4 = _MemoryRead($VPAddress, $Mem_Open1) ;vp
      $Mem_Read5 = _MemoryRead($XCoordAddress, $Mem_Open1) ;x coord
      $Mem_Read6 = _MemoryRead($YCoordAddress, $Mem_Open1) ;y coord
      _MemoryClose($Mem_Open1)
      #endregion
      
      $INI_Read2 = IniRead(@ScriptDir & "\Speed.ini","Experience",$Mem_Read2,0)

      GUICtrlSetData($Label7, $Mem_Read2) ;level
      GUICtrlSetData($Label8, Round ($Mem_Read3/$INI_Read2 * 100, 7)) ;percent
      GUICtrlSetData($Label9, $Mem_Read4) ;vp
      If $Mem_Read5 = 0 And $Mem_Read6 = 0 Then
         GUICtrlSetData($Label10, "Attacking or Jumping")
      Else
         GUICtrlSetData($Label10, $Mem_Read5 & "," & $Mem_Read6) ;x,y
      EndIf
         
   EndIf
   Sleep(25)
EndFunc

Func LoadOption()
   $GUI_Read1 = GUICtrlRead($List1)
   $GUI_Read2 = _GUICtrlListView_GetItemText($List1, $GUI_Read1 - 25) ;current sel
   $GUI_Read4 = GUICtrlRead($Label6)
   
   If $GUI_Read2 <> $GUI_Read4 Then
      $INI_Read3 = IniRead(@ScriptDir & "\Speed.ini",$GUI_Read2,"Zoom",256)
      $INI_Read4 = IniRead(@ScriptDir & "\Speed.ini",$GUI_Read2,"Cyclone",0)
      GUICtrlSetData($Input1, $INI_Read3) ;zoom
      If $INI_Read4 = 0 Then
         GUICtrlSetState ( $Checkbox1,$GUI_UNCHECKED)
      ElseIf $INI_Read4 = 128 Then
         GUICtrlSetState ( $Checkbox1,$GUI_CHECKED)
      EndIf
   EndIf
EndFunc

Func Update()
   $var1 = 0
   $List_Count =  _GUICtrlListView_GetItemCount($List1)

   
   If $List_Count = 0 Then
   ElseIf $List_Count > 0 Then
      Do
         $GUI_Read6 = _GUICtrlListView_GetItemText($List1,$var1)
         $var1 = $var1 + 1
         $INI_Read1 = IniRead(@ScriptDir & "\Speed.ini", $GUI_Read6, "window", 0)
         $INI_Read5 = IniRead(@ScriptDir & "\Speed.ini",$GUI_Read6,"Cyclone",0)
         $Mem_Open1 = _MemoryOpen($INI_Read1)
         If $INI_Read5 = 128 Then
            GUICtrlSetData ( $List_Item[$var1],"|on")
            _MemoryWrite($SpeedAddress,$Mem_Open1,128)
         ElseIf $INI_Read5 = 0 Then
            GUICtrlSetData ( $List_Item[$var1],"|off")
         EndIf
         _MemoryClose($Mem_Open1)
      Until $var1 = $List_Count
   EndIf

EndFunc

Func Focus()
   $GUI_Read4 = GUICtrlRead($Label6)
   $INI_Read1 = IniRead(@ScriptDir & "\Speed.ini", $GUI_Read4, "window", 0)
   $INI_Read2 = IniRead(@ScriptDir & "\Speed.ini", $GUI_Read4, "list",0)
   WinActivate ( "[Conquer2.0] " & $GUI_Read4)
EndFunc
Back to top
View user's profile Send private message
atom0s
Moderator
Reputation: 137

Joined: 25 Jan 2006
Posts: 7257
Location: 127.0.0.1

PostPosted: Sat Sep 16, 2017 8:25 pm    Post subject: Reply with quote

No matter what you do to an AutoIt script, it has to be interpreted at one point or another. The script can be obfuscated as much as you want but it can still be pulled from the exe. AutoIt executes the script at runtime, there is no byte code interpretation or handling done, so the raw string is going to be available at some point.

Users can set a breakpoint on the exe's script execution handler and just dump the buffer as well if you try to modify the exe any to prevent automated tools from working.

Stuff like AutoIt is not made to be used for things that are meant to be secure.

_________________
- Retired.
Back to top
View user's profile Send private message Visit poster's website
cooleko
Grandmaster Cheater
Reputation: 10

Joined: 04 May 2016
Posts: 505

PostPosted: Mon Sep 18, 2017 1:25 pm    Post subject: Reply with quote

You should consider removing the window name from the source, we don't support online cheating here.
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    Cheat Engine Forum Index -> General Gamehacking All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group

CE Wiki   IRC (#CEF)   Twitter
Third party websites