![Cheat Engine Forum Index](templates/subSilver/images/logo_phpBB.gif) |
Cheat Engine The Official Site of Cheat Engine
|
View previous topic :: View next topic |
Author |
Message |
ParkourPenguin I post too much
Reputation: 140
Joined: 06 Jul 2014 Posts: 4300
|
Posted: Sun Nov 06, 2016 6:37 pm Post subject: Track Changes to Addresses |
|
|
This script creates a gui that will log changes made to an address (or several addresses). It can be accessed by going to the "Tools" menu of the memory viewer.
By default it uses a timer to look for changes, but there is an option to use breakpoints to track all writes to the addresses. Just make sure there are enough debug registers available.
Put the script in the "autorun" folder in the main CE directory and restart CE for it to take effect.
Updated with support for signed integers and custom values using mgr.inz.Player's custom types extension here.
Description: |
Put this in the autorun folder |
|
![](images/icon_clip.gif) Download |
Filename: |
WatchChangesToAddresses.lua |
Filesize: |
23.55 KB |
Downloaded: |
4879 Time(s) |
_________________
I don't know where I'm going, but I'll figure it out when I get there.
Last edited by ParkourPenguin on Tue Nov 22, 2016 8:57 pm; edited 3 times in total |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Floydman How do I cheat?
Reputation: 0
Joined: 31 Oct 2016 Posts: 4
|
Posted: Mon Nov 07, 2016 11:09 am Post subject: |
|
|
This is absolutely amazing and precisely what I couldn't wrap my head around. And a very versatile script at that. Thank you!
|
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
predprey Master Cheater
Reputation: 24
Joined: 08 Oct 2015 Posts: 486
|
Posted: Mon Nov 07, 2016 11:22 pm Post subject: |
|
|
i'm sure this is going to be really useful for the cheat makers great work!
|
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Zephiles Advanced Cheater
Reputation: 0
Joined: 04 Feb 2016 Posts: 56
|
Posted: Sat Nov 12, 2016 2:45 am Post subject: |
|
|
This is great, but could you add support for custom types? The ones I use are 2 Byte Big Endian, 4 Byte Big Endian, and Float Big Endian.
|
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
ParkourPenguin I post too much
Reputation: 140
Joined: 06 Jul 2014 Posts: 4300
|
Posted: Sat Nov 12, 2016 9:04 am Post subject: |
|
|
That was one of the things I considered. Unfortunately, I don't believe there's any feasible way to access the registered custom types from Lua.
The next best thing I can think of off the top of my head is to give the user the ability to write a function that converts an AoB to a string, but not everyone knows how to use Lua.
_________________
I don't know where I'm going, but I'll figure it out when I get there. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Zanzer I post too much
Reputation: 126
Joined: 09 Jun 2013 Posts: 3278
|
Posted: Sat Nov 12, 2016 10:53 am Post subject: |
|
|
Have a temporary memory record added to the table as the custom type and read the .Value from that?
|
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
ParkourPenguin I post too much
Reputation: 140
Joined: 06 Jul 2014 Posts: 4300
|
Posted: Sat Nov 12, 2016 12:24 pm Post subject: |
|
|
Sure, but that seems like a very roundabout way of doing it. I would rather implement a checkbox for big endian, but in the vast majority of circumstances YAGNI.
_________________
I don't know where I'm going, but I'll figure it out when I get there. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
mgr.inz.Player I post too much
Reputation: 218
Joined: 07 Nov 2008 Posts: 4438 Location: W kraju nad Wisla. UTC+01:00
|
Posted: Mon Nov 14, 2016 7:37 am Post subject: |
|
|
I started making an extension "customTypesExt" you can use.
_________________
|
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Zephiles Advanced Cheater
Reputation: 0
Joined: 04 Feb 2016 Posts: 56
|
Posted: Tue Nov 22, 2016 10:00 am Post subject: |
|
|
I tested it with mgr.inz.Player's custom types extension, and everything seems to work except for two things. One of these things is displaying the custom types in hexadecimal form does not work. Whenever I select this, it simply displays the value in decimal form. Displaying the original types in hexadecimal form works perfectly fine, however.
The other issue is with this Lua custom type that I use:
Code: |
typename="Timer Big Endian" --shown as the typename in ce
bytecount=8 --number of bytes of this type
functionbasename="b8t"
function b8t_bytestovalue(b0,b1,b2,b3,b4,b5,b6,b7)
local time = byteTableToQword{b7,b6,b5,b4,b3,b2,b1,b0}
local sec = math.floor(time / 40500000)
if sec>=0 and sec < 0xACCC84D40 then
local ss = sec % 60
local mm = math.floor(sec/60) % 60
local hh = math.floor(sec/3600)
return hh*10000+mm*100+ss
else
return 0x80000000
end
end
function b8t_valuetobytes(i,address)
local b = readBytes(address,8,true)
if i>=0 and i<=2147475959 then
local ss = i % 100
if ss<60 then
local mm = math.floor(i/100)%100
if mm<60 then
local hh = math.floor(i/10000)
local sec = hh*3600+mm*60+ss
local time = sec*40500000
b = qwordToByteTable(time)
for i=1,4 do
local j = 9-i
b[i],b[j]=b[j],b[i] -- reverse
end
end
end
end
local UnPack = table.unpack or unpack
return UnPack(b)
end
return typename,bytecount,functionbasename
|
Every time I try to use it, it gives me an access violation error.
|
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
ParkourPenguin I post too much
Reputation: 140
Joined: 06 Jul 2014 Posts: 4300
|
Posted: Tue Nov 22, 2016 10:54 am Post subject: |
|
|
I thought I was forgetting something... I guess that was one of them. Fixed the hexadecimal output for integral custom types. I also added support for signed custom types, but it inherently isn't well-defined. This implementation uses the most significant bit (determined by the custom value's byte size) of the resulting value (not the bytes as they are in memory). That is good for types like big endian, but bad for types like the old flash 4b*8.
The custom types extension doesn't seem to work for Lua custom types. There should be integrated support for custom types in Lua in the next major update to CE, so I'll update this extension when that comes around. If you need it immediately, you may want to consider translating that Lua script to assembly.
_________________
I don't know where I'm going, but I'll figure it out when I get there. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Zephiles Advanced Cheater
Reputation: 0
Joined: 04 Feb 2016 Posts: 56
|
Posted: Tue Nov 22, 2016 11:45 am Post subject: |
|
|
ParkourPenguin wrote: | I thought I was forgetting something... I guess that was one of them. Fixed the hexadecimal output for integral custom types. I also added support for signed custom types, but it inherently isn't well-defined. This implementation uses the most significant bit (determined by the custom value's byte size) of the resulting value (not the bytes as they are in memory). That is good for types like big endian, but bad for types like the old flash 4b*8.
The custom types extension doesn't seem to work for Lua custom types. There should be integrated support for custom types in Lua in the next major update to CE, so I'll update this extension when that comes around. If you need it immediately, you may want to consider translating that Lua script to assembly. |
Alright, the update makes them work. One more thing I was wondering: would it be possible to add an option to select the address to remove instead of having to type it in every time? It gets a bit tedious if you're only working with a small number of addresses.
|
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
ParkourPenguin I post too much
Reputation: 140
Joined: 06 Jul 2014 Posts: 4300
|
Posted: Tue Nov 22, 2016 1:15 pm Post subject: |
|
|
I couldn't think of any easy way to right click on a column and have a "delete" option. There's an OnColumnClick event that only fires on a left click, the MouseDown/MouseUp events won't fire when clicking on the columns, the OnContextPopup event isn't accessible from Lua, and I'm not interested in making a workaround for any of those.
I'll work on adding column options to the list view's context menu to make it a bit faster.
_________________
I don't know where I'm going, but I'll figure it out when I get there. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Zephiles Advanced Cheater
Reputation: 0
Joined: 04 Feb 2016 Posts: 56
|
Posted: Tue Nov 22, 2016 2:17 pm Post subject: |
|
|
Could you possibly add a dropdown list to choose the address that you want to remove?
|
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
mgr.inz.Player I post too much
Reputation: 218
Joined: 07 Nov 2008 Posts: 4438 Location: W kraju nad Wisla. UTC+01:00
|
Posted: Tue Nov 22, 2016 3:50 pm Post subject: |
|
|
ParkourPenguin wrote: | There should be integrated support for custom types in Lua in the next major update to CE |
I can add customtypeTypeLua to my extension. But, it looks like CE6.6.1 (or 6.7) will be released soon. (maybe this year?)
About signed unsigned customtypeTypeAutoAssembler values. My script just returns EAX value.
To get signed value you just use this:
val = t.getValue(address)
if val>0x7fffffff then val=val-0x100000000 end
If cutomtype is float (usesFloat) it is already signed.
_________________
|
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Zephiles Advanced Cheater
Reputation: 0
Joined: 04 Feb 2016 Posts: 56
|
Posted: Tue Nov 22, 2016 5:27 pm Post subject: |
|
|
I have another small problem. I edited one of the custom types as follows:
Code: |
alloc(TypeName,256)
alloc(ByteSize,4)
alloc(ConvertRoutine,1024)
alloc(ConvertBackRoutine,1024)
TypeName:
db '2 Byte Big Endian',0
ByteSize:
dd 2
//The convert routine should hold a routine that converts the data to an integer (in eax)
//function declared as: stdcall int ConvertRoutine(unsigned char *input);
//Note: Keep in mind that this routine can be called by multiple threads at the same time.
ConvertRoutine:
//jmp dllname.functionname
[64-bit]
//or manual:
//parameters: (64-bit)
//rcx=address of input
xor eax,eax
mov ax,[rcx] //eax now contains the bytes 'input' pointed to
xchg ah,al //convert to big endian
movsx eax,ax // added
ret
[/64-bit]
[32-bit]
//jmp dllname.functionname
//or manual:
//parameters: (32-bit)
push ebp
mov ebp,esp
//[ebp+8]=input
//example:
mov eax,[ebp+8] //place the address that contains the bytes into eax
mov ax,[eax] //place the bytes into eax so it's handled as a normal 4 byte value
and eax,ffff //cleanup
xchg ah,al //convert to big endian
movsx eax,ax // added
pop ebp
ret 4
[/32-bit]
//The convert back routine should hold a routine that converts the given integer back to a row of bytes (e.g when the user wats to write a new value)
//function declared as: stdcall void ConvertBackRoutine(int i, unsigned char *output);
ConvertBackRoutine:
//jmp dllname.functionname
//or manual:
[64-bit]
//parameters: (64-bit)
//ecx=input
//rdx=address of output
//example:
xchg ch,cl //convert the little endian input into a big endian input
mov [rdx],cx //place the integer the 4 bytes pointed to by rdx
ret
[/64-bit]
[32-bit]
//parameters: (32-bit)
push ebp
mov ebp,esp
//[ebp+8]=input
//[ebp+c]=address of output
//example:
push eax
push ebx
mov eax,[ebp+8] //load the value into eax
mov ebx,[ebp+c] //load the address into ebx
//convert the value to big endian
xchg ah,al
movsx eax,ax // added
mov [ebx],ax //write the value into the address
pop ebx
pop eax
pop ebp
ret 8
[/32-bit]
|
The only things different from the previous version of it is that
Code: |
movsx eax,ax // added
|
is added after each instance of
Code: |
xchg ah,al //convert to big endian
|
The values display properly in Cheat Engine itself, but when using them with this extension, negative values do not work properly. For instance, -1 will be displayed as 4294901759, -2 will be displayed as 4294901758, -3 will be displayed as 4294901757, etc. Also, checking or unchecking the signed checkbox does not change the result. Is there a way around this?
|
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum
|
|